|
<< Click to Display Table of Contents >> Build 3.1.216 |
  
|
|
<< Click to Display Table of Contents >> Build 3.1.216 |
|
Release date: May 7, 2021
Fixes and improvements:
GDW:
| • | Moving Instrument Views could cause the buttons to be lost. |
| • | Occasional lockup fixed when Grouping and Ungrouping objects |
| • | Moving a group of buttons off-screen (to the right, or above, the visible area of the GDW) would leave the buttons behind, or not properly remove them while they were partially still in view. |
Licensing:
| • | Evaluation Soft Licenses had an 'Activate Now' button shown on the "M2063: Evaluation, expires in..." message box even after activation. |
Position Dynamics:
| • | Using Position Dynamics to move groups of buttons off-screen either left them behind or did not properly remove them as they were being moved off. |
Trend Charts:
| • | Trend Charts with scrolling set to None - rescale time to fit on the 'Chart' tab, which were also set to automatically print to JPG, could sometimes crash when used on a Remote to a Local that was slow or via a slow connection. |
| • | Trend Charts which are set to non-scrolling charts (by checking 'None - rescale time to fit' on the Chart tab) which also have 'Auto save to JPG' set on the Print&Batch tab may crash when on a Remote to a Local that is particularly slow. |
Data Logging:
| • | If a path was specified for a Log Report then due to a previous fix the backslashes in the path were being erroneously replaced with underscores. |
Strategy Controller:
| • | Strategy Controller was sometimes being started twice on very large systems with lots of User Variables. This could cause CountupTimers to misbehave and could also have given a 'E17024: Failed to come out of Runtime properly' message later. |
Eurotherm Drivers:
| • | Eurotherm Nanodac: File names added as parameters to the driver. |