|
<< Click to Display Table of Contents >> Build 3.0.043 |
  
|
|
<< Click to Display Table of Contents >> Build 3.0.043 |
|
Release date: 2nd June 2015
Fixes and improvements:
Variables List:
| • | Speed improvements |
| • | The Parameter Attribute Apply to all similar items when changing things in the 'L','A','S','R' columns is now OFF by default to avoid unintended setting of other parameters |
| • | Enhancements to multi-drag/drop 'vertical' to 'horizontal' flipping while using the Spread handles, including a better indication of when the flip might happen |
| • | When doing a multi-drag/drop while the 'grid' is disabled and then choosing Reset Spacing could cause a lockup |
GDWs:
| • | Parameters requested from a GDW were not optimally scheduled, causing occasional slow response times |
| • | Improved response time to values entered by a user when comms throughput is slow or overloaded. |
| • | The Screen Size Guide font color could be changed, but this was not being saved |
| • | Edit->Replace while Online with Live values did not refresh the screen correctly to reflect the new variable associations |
| • | Remember Window Positions used to require a dongle to be connected in order to work |
Trend Charts:
| • | When using variables to define Pen Scales, this could occasionally revert to Auto-scaling |
| • | Pen Scales from variables were not correctly using the backup fixed values in the case of the variables being unavailable over comms |
| • | Adding a Pen to a trend chart would also add similar items to Logging if the Apply to all similar items checkbox in the Parameter properties has been enabled |
Recipes:
| • | Recipe Download from a button could occasionally crash. This only affected some instruments. |
Historical Replay:
| • | Bar charts did not operate in Historical Replay if they were not positioned near other items on the screen |
SpecView Networking:
| • | SpecView Remote could occasionally crash just after loading a Project |
Import Project:
| • | Importing one project into another would not correctly interpret unique addresses for non-Modbus instruments in the projects |
Drivers:
| • | Modbus: Driver was pausing sometimes when writing to some parameters of type 'time' |
| • | Generic Modbus: Used to have a Primary Parameter at Reg 0, and if this register was unreadable, the whole block would be shut down over TCP/IP |
| • | Honeywell HC900: Import of HCDesigner files left out information that allowed Labels in SPS blocks to work correctly |
| • | Eurotherm 3500: New parameters added |
| • | Watlow StandardBus: Autodetecting these controllers would sometimes crash if scanning was stopped by the user before the scan was completed |
| • | Watlow StandardBus: Driver could crash when sending values to parameters that were unavailable due to the controller being switched off or disconnected |
| • | OPC: Some changes to the OPC driver for improved debugging |