<< Click to Display Table of Contents >>
Note: Driver defaults to 8 Databits, No Parity, 1 Stop Bit
Note: Driver Supports BCC checksum only. CRC mode is not supported
Format is:
AA,L,P
Where:
AA: Two digit address of controller in decimal, 01 to 99
L: Loop Number, 1 to 33 and 0 for the CPU view
P: Precision, 0=0DP, 1=1DP, 2=2DP, 3=3DP
Examples:
01,1,1 Instrument 1, Loop1, 1DP
04,33,2 Instrument 4, Loop 33, 2DP
Driver Command Support:
This driver supports the following driver commands:
TTL=x Set Time To Live to x tenths of a second, Eg TTL=5 means half of a second.
ED=y Set Error Delay to y tenths of a second.
Also supported are the T and R commands for Timeout and Retry, see the Driver Command description for information.