|
<< Click to Display Table of Contents >> Build 3.0.066 |
  
|
|
<< Click to Display Table of Contents >> Build 3.0.066 |
|
Release date: 18th Aug 2016
Fixes and improvements:
General:
| • | Language problems in German |
Trend Charts:
| • | Printing screens with Trend Charts sometimes crashed with certain HP printers |
Variables List:
| • | Export/Import Variables List: Doing an Import while a previously Exported Varlist.csv file is open in Excel causes SpecView to exit |
| • | Crash when defining COM port based instruments marked as TCP/IP |
Data Logging:
| • | Alarm file corruption could cause log file conversion to crash |
Historical Replay:
| • | Customers reporting that 'End of Data' time is offset by timezone |
| • | Replaying short batches at high rates (or with high CPU load factor) can result in no updates at the end of Historical Replay |
| • | Trend Charts in Historical Replay now show the batch number of the selected batch |
Passwords:
| • | Password system did not draw a box around text items marked as 'Available at level 1' when the Password box was first opened |
Networking:
| • | On a Remote computer, a button that does a 'Run External Program' would not work |
| • | A Remote disconnecting from the local could Lockup the local under rare timing conditions |
| • | Cannot start Local on an IP address that starts with a single digit, e.g. 3.0.0.111 |
Autodetect:
| • | Autodetect Honeywell HC900 gives spurious error message when using a 'Mini' Dongle (Note: It is not possible to use the Honeywell HC900 with a Mini dongle) |
| • | ModBus TCP Autodetect left optimized driver commands in the settings file that may not be useful in real running situations |
ModBus:
| • | Some complex recipe items would not write correctly since Modbus 4.1.32.x. This affects Watlow F4 Recipe and Yokogawa UP55A as well as some others |
| • | Anomaly with Watlow F4 when the Profile number was 0 |
| • | 'Scaling of numbers' for parameters of type 'Time' in blocks were Writing incorrectly |
| • | Modbus driver could sometimes stall after a comms loss on slow links |
OPC:
| • | Several OPC driver fixes |